Aereation Spider is a ready to use plastic hollow base that is 6" wide x 5" high , and it comes with that comes with 6 x 8" Aereation tubes - total 1.2 mtrs" connected to a single inlet. It comes with a 1/2" nipple inlet. Just the Aereation base without tubes is also available for making the assembly on field. Using this you can assemble the Aereation tubes faster and easier than making frames of PVC pipe or other elaborate fabrication. The base is hollow so you can fill it with cement or sand and give it required weight to stay at the bottom. 4 Kg mixture of Cement, sand and water is recommended so that when it hardens, the bolted 6 way will be fixed permanently. Since the threaded inlet is of 1” you can use inlet nipples of size ½”, ¾” or 1” . If you are using a larger inlet like ¾” or 1”, you can even connect two ends of longer Aereation tube , rather than using end plugs – like making a flower. We recommend using upto a maximum of 2 mtrs tube if you are using ¾” or 1” inlet.

An Aeration tube, whose purpose is to gradually diffuse air into the tank and provide oxygen for fish to breathe, is a necessity to have around your Biofloc Fish Farming Tank , aquarium and Pond. It’s also a must have for Hydroponic and Circulation system. Aeration Tube are made of high quality non-toxic material, with high temperature sintering, tube are sturdy and durable, have high dissolved oxygen rate and create even and tiny bubbles rather than a limited number of large ones.

pipe is made from high-quality UV-resistant Linear low-density polyethylene (LLDPE) material, is much stronger, and able to withstand greater impact

Aereation is impossible without the help of these accessories, they give a high command over the flow and direction of air projected from blowers resulting to proper and neat micro bubble formation.